Silk Screen Uv Ink Curing Machine

Out of Stock The TX-UV series of light-solid machine is irradiated with strong ultraviolet light from a special UV light source to the surface of the workpiece with the photosensitive printing material to achieve rapid curing (the emission spectrum of the lamp is consistent with the absorption spectrum of the printing material),The cured film has certain corrosion resistance, heat resistance and certain adhesion strength.This machine is mainly used for the curing process of light-curing screen printing inks such as sanding, refraction, wrinkles, crystal, UV optical axis, etc.Widely used in clothing thermal transfer film, tobacco and alcohol, wine labels, cosmetics, health products, blessings, calendars and other packaging. B、 Characteristic： 1、 Improve product quality 2、 Environmentally friendly Practical and reliable 3、 Fast light fixation、efficient、Low consumption 4、 Compact Size、New design、Easy operation C、 Process： Feed——Light solid——Discharge D、 Main technical parameters： 1、 Curing process size：800mm,Thickness of solidified workpiece:70 mm. 2、 Equipment noise：Less than 65 decibels. 3、 Transfer speed：1-30M/Min Stepless speed. 1–Feed port 2–Feed port height adjustment baffle 3–UV light solid area 4–Circulating cooling fan 5–Discharg port height adjustment baffle 6–Conveyor 7–Control panel 2、 Airframe structure： The frame is made of angle steel,good rigidity、great intensity、Strong and stable,Surface coated with anti-rust primer beautiful and oxidation resistant.waterproof、corrosion resistance、the fuselage box panel is detachable, making the machine easy to adjust and maintain.In order to prevent light leakage, the curing zone adopts a light-tight structure. 3、conveyer system： Large speed range，Curable multiple photosensitive printing materials，Due to differences in the printing recipes of each factory，the color of the print is different and the thickness of the silk screen film is different.，Curing time is different，That is, the transmission network is required to have different transmission speeds.，to meet the above requirements，this machine uses micro DC motor drive，its small size, reliable operation and wide speed range,After deceleration, the speed of the transmission network can be steplessly regulated within 1-30 m/min.,ractice has proved that the system has a stable start and operation. 4、Light source system： The choice of UV lamp for light source is one of the latest technological achievements in China. It is characterized by high power and high intensity. The spectrum line (300-450mm) is consistent with the photosensitive line absorption spectrum, and the lamp life is long (about 600 hours). The index is an ideal light source compared with similar foreign products. 5、Temperature and cooling system： The solidification of the workpiece is carried out in a semi-closed solidification zone. Due to the large power of the lamp and the large amount of heat generated, the machine is designed to adopt forced ventilation. A cooling fan is installed above the solidification zone, and a strong exhaust fan is added below the solidification zone. The heat emitted by the lamp tube can be effectively discharged, and the thin and light products such as film or paper can be closely attached to the conveyor belt during the conveying process, thereby effectively preventing the paper card from burning in the solidification zone due to the accumulated temperature rise for a long time. 6、Transport belt system： It is made of Teflon and is durable in corrosion resistance. The conveyor network runs continuously at the selected speed. The piece enters the solidification zone from the right end, and solidifies in the movement, and the work is sent out from the left end. In order to ensure the smooth movement of the workpiece with the conveying net and the speed is uniform when moving, the driving shaft adopts a guiding groove attached to the net, so that the transmission speed changes little. The workpiece moves smoothly during the curing process, thereby effectively ensuring the curing quality of the workpiece. When the conveyor belt has a certain positional shift (left/right) during the conveying process, the topping screw on the feeding end can be adjusted with an open-end wrench until the middle of the conveyor belt processing roller. The principle of adjustment is: if the conveyor belt is offset to the left, tighten the top tightening screw on the left side; otherwise, tighten the top tightening screw on the right side. F、 Control panel operation steps： 1、 Connect the power cable on the device to the air switch according to the three-phase 380V L1/L2/L3/N line according to the three-phase power wiring requirements. 2、 Start up in the following order, operate each switch on the control panell： Press “power switch” to turn on the total power switch and turn on the switch of fan 1 and fan 2. Turn on the transfer switch, turn the “speed switch to “1” position, and fine-tune the knob to start the transfer system to the de...